Difference between revisions of "MPI on virtual nodes"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
<code>--mca btl_tcp_if_include tun0</code> | <code>--mca btl_tcp_if_include tun0</code> | ||
| + | |||
| + | Alternatively one may specify the network to be used for communication to cover both real and virtual node networks: | ||
| + | <code>--mca btl_tcp_if_include 192.168.100.0/23</code> | ||
Source for more knowledge: | Source for more knowledge: | ||
http://stackoverflow.com/questions/10466119/mpi-send-stops-working-after-mpi-barrier/10473106#10473106 | http://stackoverflow.com/questions/10466119/mpi-send-stops-working-after-mpi-barrier/10473106#10473106 | ||
Revision as of 03:16, 25 September 2012
To run MPI on virtual nodes one has to specify the interface. The argument (to mpirun) needed is:
--mca btl_tcp_if_include tun0
Alternatively one may specify the network to be used for communication to cover both real and virtual node networks:
--mca btl_tcp_if_include 192.168.100.0/23
Source for more knowledge: http://stackoverflow.com/questions/10466119/mpi-send-stops-working-after-mpi-barrier/10473106#10473106
